Application:
• 8 needed in 45RU cabinet
• 4 needed in 38RU cabinet


Features:
• Designed to convert the shelf rails in a 26" cabinet back to 19"
• Available in textured black
• Fasteners provided

Part No.	Dimensions
9070	26" to 19" converter bracket

Applications:
• For use when the standard shelf installation is difficult - usually when side
  access is restricted

Features:
• Available in textured black
• Fasteners provided
• Sold as a set of 4 brackets
 

Part No.	NZ Part No.
9229	9166

Application:
• 8 needed in 45RU cabinet
• 4 needed in 38RU cabinet


Features:
• Designed to convert the shelf rails in a 26" cabinet back to 19"
• Available in textured black
• Fasteners provided

Part No.	Dimensions
9070	26" to 19" converter bracket

• To convert most Keystone style jacks to a Clipsal style face plate.
• Available in 4 colours
• Not available in NZ
 

Part No.	Colour
50019601W	White
50019601Y	Yellow
50019601BL	Blue
50019601BK	Black

 

Material:  1.2mm steel zinc annealed
Finish:   Powdercoat (textured black)

Features:
• Easily installed
• All fasteners provided
• Double folded edge fo cable safety
 

Part No.	Width
C**51	150mm
C**52*	225mm
C**53*	300mm

** Height of cabinet in RU
* Available on request in NZ

Features:
• Each fastener kit consists of  cage nuts, screws and washers
 

Part No.	Description
9074	Fastener Kit x4 (set)
9075	Fastener Kit  (x100 pack)

 

Features:
• Castors attach directly to frame of cabinet for extra stability and support
• Available as a set of (4) four
• Front castors are provided with brakes
• Castors will raise the cabinet enclosure 100mm off the ground
• Load capacity to 250kg max. (UDL)
• Optional bottom plate with cable entry cut-out available upon request

 

Part No.	NZ Part No.	Description
9040	9035	Suits all free standing cabinets (plinth not included)

Application:
• Usually installed on the rear steel door
• Designed to hold A4 documents

Features:
• Available in nurse grey and black
• Affixed using industrial strength adhesive
 

Part No.	Dimensions (h) x (w) x (d)
9095	250mm x 250mm x 32mm
9095-BL	250mm x 250mm x 32mm

Features:
• Protects cable from sharp edges
• Comes in a set of 3
• Available in black only
 

Part no.	Size
9191*	34.9mm
9192*	63.5mm

* Available on request in NZ

Features:
• Available as a set of (4) four
• Load capacity to 250kg max. (UDL)
• Feet attached directly to frame of cabinet for extra stability and support
• Levelling feet are fully adjustable
• Feet will raise the enclosure up to 60mm off the ground

 

Part No.	Description
9039	Suits all freestanding cabinets (plinth not included)

Features:
• Provides cable entry at rear of cabinet
• Load capacity to 250kg max. (UDL)
• 50mm high provided
• Available in black only
• Other sizes available upon request

 

19" Part No.	26" Part No.	Depth of Cabinet
9051	9150	600(mm)
9052	9069	800(mm)
9151	9152	900(mm)
9153	9156	1000(mm)

Features:
• Provided to cover open access holes


Part No.
9232

Applications:
• Supplied at a set for 2 vertical rails
• Can be supplied as set pre-packaged
• Can be supplied factory fitted

Part No.
9250

• Not Available in NZ

Features:
• Protects cables from sharp edges
• Comes in set of 3

 

Part No.	Size
9193*	34.9mm
9194*	63.5mm

* Available on request in NZ

Applications:
• Used for fixing together of two frames when banking without side panel


Features:
• One size suits all
• Easily installed
• Available in nurse grey and black
• All fasteners provided
• Installations and instructions sheet provided
 

Part No.	Description
9072	Nurse grey
9072-BL	Black

Features:
• One size suits all
• Top and bottom supplied as one unit
• Maximum weight is determined by the strength of the wall and the
  fasteners used
• Easily installed
• Available in nurse grey


Part No.
9073