Electropar - Substation & Transmission - Full-Tension-AAAC-Uni-Dead-Ends-AU

Full Tension AAAC Uni Dead Ends AU

Pre-assembled to fit overhead conductors, Electropar's full tension Uni Dead End is a forged, galvanised fitting, supplied already compressed inside the tubular aluminium sleeve. To fit, the aluminium Uni Dead End is simply compressed on to the conductor. The dead end steel can be specified with either clevis, eyebolt, or oval eye attachment options. Full tension Uni Dead Ends are supplied with Uni-Grip "C" jointing compound. Crimping can be done with conventional aluminium A/F dies. Full tension Uni Dead Ends are normally supplied with a single jumperterminal. Double jumperterminals are available on request. The angle of the jumper terminal and/or the jumper strap can be altered to suit individual requirements.

Ordering Information: To complete catalogue number, insert C for Clevis End, E for Eye End or OA for Oval End E.G.: Oval Eye compression Dead End for Boron Catalogue Number is EPCDOE-NEON-28.5AF