Tubular Dead End Repair Assemblies

For Full Tension Repair Termination of Steel Cored Aluminium Conductors

Electropar's Dead End Repair fittings for ACSR are effectively double the length of standard compression Tubular Dead End Assemblies.
The fittings are designed to remove the need to install a new conductor, plus a compression joint, plus a dead end, when a dead end joint or a full tension joint, has to be replaced.
The Repair Dead End range of fittings have been developed to suit standard Canadian, British, Australian and New Zealand ACSR conductors from 12mm to 40mm OD and many have been tested mechanically to IEC 61284 Edition 2. Repair Dead Ends save time at installation when a high resistance fitting needs replacing and minimises the number of joints made within a transmission or distribution system. The fittings are all installed with industry standard tooling and can be applied to earthwires as well as phase conductors.
Electropar's tubular Dead End Repair Assemblies are supplied with Unigrip C Jointing Compound.

  
   
 

CATALOGUE NUMBER ACSR

DIMENSIONS mm

JUMPER TERMINAL

COMPRESSION DIE NUMBER

APPROX WEIGHT

L
H

Aluminium

Steel

kg
EPTDRA - Coyote - 7

800
286

EPJT - 7

DA 7

DS7

4.2
EPTDRA - Hyena - 7

800
286

EPJT - 7

DA 7

DS7

4
EPTDRA - Wolf - 8

850

305

EPJT - 8

DA 8

DS8

4.5
EPTDRA -Goat-10

1020
384

EPJT-10

DA10

DS10

9
EPTDRA -Zebra-11

1100
406

EPJT-11

DA11

DS10

9.8
Note: Common NZ ACSR conductors listed, others available on request.
Oval Eye Dead End Repair assemblies available on request.

 

Similar Products