Manufactured from aluminium alloy wire, Electropar's preformed armour rods are designed to protect the conductor from bending, compression stresses, abrasion and arc-over.
Preformed Line Guards
Manufactured from aluminium alloy wire, Electropar's preformed lineguards may be regarded as a light duty version of the armour rod for protection of conductors against abrasion and ...
Preformed Dead Ends One Piece
Manufactured from aluminium alloy wire, Electropar's preformed dead ends are designed for terminating AAC, ACSR and AAAC conductors. The dead end's holding strength on AAC conductors...
Preformed Dead Ends Multi - Piece / Full Tension
For terminating ACSR conductors, Electropar's single piece and multi piece preformed wire dead ends are designed for dead ending ACSR conductors.
Cast Aluminium Clevis Thimble 7OkN
Electropar's cast aluminium clevis thimble is RATED 7OkN THROUGH THE RADIUS WHERE THE PREFOR...
Neoprene Preformed Dead Ends
Manufactured from galvanised steel wire, Electropar's neoprene bonded dead ends are suitable for direct application over polyethylene or neoprene insulated aluminium or copper conduc...
Preformed Guy Grip Dead Ends
Electropar's guy grips are designed to be used with galvanised steel guy wire for guying distribution power poles.
Preformed Guy Locks
Electropar's guy grips are designed to be used with galvanised steel guy wire for guying distribution power poles.
Copper Dead Ends
Electropar's copper dead ends are manufactured from copperweld (copper coated steel) and are designed to e...
Galvanised Steel Dead Ends on Copper Conductors
Electropar's Galvanised Steel dead ends can be used for terminating bare copper overhead conductors. Galvanised steel dead ends for copp...
