Page 7 - NZ_Communications_Catalogue
P. 7
COYOTE DTC (Drop Termination Closure)
®
“Versatile, compact and quick to install” is the response when asked to describe
the new COYOTE DTC (Drop Termination Closure). The closure’s compact size
®
and rugged exterior is designed to allow for installation in tight spaces without
compromising functionality. Four corner entrance ports provide the installer the
flexibility to quickly configure the closure as needed.
Features:
• Size: 9.1" x 7.6" x 1.7" (232 mm x 194 mm x 42 mm)
• Max. Splice Capacity: (16) Single Fusion (splice blocksprovided), (36) Ribbon/Mass
Fusion (splice blocks provided)
• Configuration: In-line or Butt Splice
• Port Quantity: 4 (2 each end)
• Application: Direct buried, below grade, pole/wall mount or aerial
• Flexible grommet sealing technology supports a wide range of flat or round cable profiles
• Snap together design is quick to assemble. No special tools required
• Accepts cables up to .370 diameter (9.4mm)
• Tested in accordance to TR-NWT-000251 by an independent outside lab
• Internal Organiser manages buffer tube or ribbon cable
• Factory installed permanent gasket allows re-entry and re-use
• A cost effective solution for quick restoration of damaged/cut fiber service drops
®
• Utilizes the LITE-GRIP Splice Block System which permits single fusion, mass fusion,
mechanical, PLC splitters or a combination of all within one closure
Part No. COYOTE DTC Closure Kits
®
COYDTC-001 For flat and small drop cables. Kit includes: (4) Port Sealing Grommets
for flat drop cable and .170" -.25" (4.3 - 6.4 mm) cable diameters,
(2) Single Fusion Splice Blocks, (1) Ribbon Splice Block and Cable
Restraint Hardware
COYDTC-002 For larger round cables. Kit includes (4) Port Sealing Grommets for .25"
8.14" (207 mm)
-.37" (6.4 - 9.4 mm) cable diameters, (2) Single Fusion Splice Blocks,
(1) Ribbon Splice Block and Cable Restraint Hardware
9.14" (232 mm)
COYDTC-003 For large round shielded drop cables. Kit includes (4) Port Sealing
Grommets for .25" -.37" (6.4 - 9.4 mm) cable diameters, (4) Small Hose
Clamps, (4) Cable Retention Clips, (2) Single Fusion Splice Blocks, (1)
Ribbon Splice Block, Cable Restraint Hardware, (4) shield continuity
clips and (2) shield continuity wire assembly
7.64" (194 mm) COYDTC-004 For Sumitomo PureFit FTTX 36 Fiber Flat Drop Cable. Kit includes
™
(2) grommets for Sumitomo PureFit cable (2) sealing port grommets for
.170"- 250" (4.3 - 6.4) mm cable diameters (1) splice tray with (4) splice
blocks, (1) buffer tube storage ring and cable restraint hardware.
1.67"
(42 mm)
Part No. COYOTE DTC Accessory Kits
®
80809960 Hose Clamp Clip Kit - Includes (4) Small Hose Clamps, (4) Cable
Retention Clips
80811033 .170" - .250" (4.3 - 6.6 mm) Grommet Kit – Includes (4) Grommets
80811034 .250" - .370" (6.36 - 9.4 mm) Grommet Kit – Includes (4) Grommets
DTC
4 Re-Enterable
4Re-Usable
4 Hermetically
Toolless Assembly Sealing grommets Hose Clamp Clip Kit Sealed
Free-Breathing
Wall Mount Application Small Fiber Count Closure
4 Aerial
4 Pole/Wall Mount
4 Below Grade
4 Direct Buried
Cable Entrance Splice Block DTC Grommets Flame Retardant
1 - 6